DTC C0045 Different VDC Control Module Specification
DTC DETECTING CONDITION:
Different control module specification
TROUBLE SYMPTOM:
- ABS does not operate.
- VDC does not operate.
DIAGNOSIS PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK VDCCM&H/U SPECIFICATION. Check the identification mark of the VDCCM&H/U. Identification mark of VDCCM&H/U Wagon model OUTBACK 3.0 R: G5 Sedan model OUTBACK 3.0 R: GB |
Is the identification mark of VDCCM&H/U the same as vehicle specification? | Go to step 2. | Replace the VDCCM&H/U. < Ref. to VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM&H/U) . > |
| 2 CHECK TCM SPECIFICATION. Check the TCM specification. |
Is the specification of TCM same as vehicle specification? | Go to step 3. | Replace the TCM. < Ref. to TRANSMISSION CONTROL MODULE (TCM) - 4AT . > < Ref. to TRANSMISSION CONTROL MODULE (TCM) - 5AT . > |
3 CHECK AT SYSTEM.
|
Is DTC of AT system displayed? | Repair the AT system. | Go to step 4. |
| 4 CHECK ECM SPECIFICATION. Check the ECM specification. |
Is the specification of ECM same as vehicle specification? | Go to step 5. | Replace the ECM. < Ref. to ENGINE CONTROL MODULE (ECM) - H4SO . > < Ref. to ENGINE CONTROL MODULE (ECM) - H4DOTC . > < Ref. to ENGINE CONTROL MODULE (ECM) - H6DO . > |
5 CHECK THE VDCCM&H/U.
|
Is the same DTC displayed? | Replace the VDCCM&H/U. | Go to step 6. |
| 6 CHECK OTHER DTC DETECTION. | Is any other DTC displayed? | Perform the diagnosis according to DTC. | It results from a temporary noise interference. |