LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback XT, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4DOTC) >> Read Diagnostic Trouble Code (DTC) >> Operation >> SUBARU Select Monitor (OBD Mode)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

SUBARU Select Monitor (OBD Mode)

  1. On the «Main Menu» display screen, select {Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after the information of engine type has been displayed.
  4. On the «Engine Diagnosis» display screen, select the {OBD System} and press the [YES] key.
  5. On the «OBD Menu» display screen, select the Diagnostic Code(s) Display and press the [YES] key.
  6. Make sure DTC is shown on the screen.
NOTE:
  • For detailed operation procedure, refer to the "Subaru Select Monitor Operation Manual".
  • For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)".

    < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >

scientia non olet · About LEMON Manuals