Combination Meter Assembly: Disassembly: Notes

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.

Disengage claw (F) to remove case (B) from back cover (A).
Disengage claw (G) to remove meter glass (E), reflector (D), and window plate (C) from inner case.

Fig 1: Identifying Meter Glass, Reflector, And Window Plate From Inner Case
Courtesy of SUBARU OF AMERICA, INC.
Pull up claw (A) in portion (B) of printed circuit (C) with combination pliers. Push out speedometer assembly (D) and tachometer assembly (E) using hole (F).
Pull up claw in the center of printed circuit (C), and remove printed circuit from case (G).

Fig 2: Identifying Printed Circuit, Speedometer Assembly And Tachometer Assembly
Courtesy of SUBARU OF AMERICA, INC.