LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls (Diagnostics) (H6DO) >> Clear Memory Mode >> Operation >> SUBARU Select Monitor (OBD Mode)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

SUBARU Select Monitor (OBD Mode)

  1. On the «Main Menu» display screen, select the {Each System Check}.
  2. On the «System Selection Menu» display screen, select the {Engine Control System}.
  3. Select the [OK] after the information of engine type has been displayed.
  4. On the «Engine Diagnosis» display screen, select the {OBD System}.
  5. On the «OBD Menu» display screen, select {DTC Clear}.
  6. When the "Perform Diagnostic Code(s) Clear?" is shown on the screen, select the [OK].
  7. Turn the ignition switch to OFF and then close the Subaru Select Monitor.
    NOTE:
    • Initial diagnosis of electronic throttle control is performed after memory clearance. Because of this, start the engine 10 seconds or more after the ignition switch is turned ON.
    • For detailed operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL ".
scientia non olet · About LEMON Manuals