SUBARU Select Monitor (Normal Mode)

On the «Main Menu» display screen, select the {Each System Check}.
On the «System Selection Menu» display screen, select the {Engine Control System}.
Select the [OK] after the information of engine type has been displayed.
On the «Engine Diagnosis» screen, select the {DTC Display}.
On the «Diagnostic Code(s) Display» screen, select the {Current Diagnostic Code(s)} or {History Diagnostic Code(s)}.
NOTE:
- For detailed operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL ".
- For details concerning DTC, refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .