Data Link Connector: Note
This connector is used both for general scan tools and the Subaru Select Monitor.
CAUTION:
Do not connect any scan tools other than general scan tools and the Subaru Select Monitor, because the circuit for the Subaru Select Monitor may be damaged.
DATA LINK CONNECTOR REFERENCE
| Terminal No. | Content | Terminal No. | Content |
|---|---|---|---|
| 1 | Blank | 9 | Blank |
| 2 | Blank | 10 | Blank |
| 3 | Ground | 11 | Blank |
| 4 | Blank | 12 | Blank |
| 5 | Blank | 13 | Blank |
| 6 | CAN-H | 14 | CAN-L |
| 7 | Subaru Select Monitor signal | 15 | Blank |
| 8 | Blank | 16 | Power supply |