LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> Forester X, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Diagnostics) (H4SO) >> System Operation Check Mode >> Operation >> Idle Speed Control
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Idle Speed Control

CAUTION: After carrying out the Operation Check Mode, perform the Clear Memory Mode <Ref. to OPERATION , Clear Memory Mode. > and Inspection Mode <Ref. to PROCEDURE , Inspection Mode. >.
  1. On the «System Operation Check Mode» display screen, select the {Idle Speed Control}.
  2. On the «Start the Engine» display screen, start the engine and select the [OK].
  3. On the «idle Speed Control» display screen, select [up triangle] or [down triangle] to change the setting value, and select the [OK].

    It is possible to set by 50 rpm, ranging from 500 rpm to 2,000 rpm. However, the actual idle speed that can be controlled is varied by vehicle type.

  4. Selecting the [NO] completes the Idling Speed Control. The display will then return to the «System Operation Check Mode» screen.
scientia non olet · About LEMON Manuals