SUBARU Select Monitor (OBD Mode)
- On the «Main Menu» display screen, select {Each System Check}.
- On the «System Selection Menu» display screen, select {Engine Control System}.
- Select the [OK] after the information of engine type has been displayed.
- On the «Engine Diagnosis» display screen, select {OBD System}.
- On the «OBD Menu» display screen, select {DTC Clear}.
- When the «Clear Diagnostic Code?» is shown on the screen, press the [OK].
- Turn the ignition switch to OFF and then close the Subaru Select Monitor.
NOTE:
For detailed operation procedure, refer to the " SUBARU SELECT MONITOR OPERATION MANUAL ".