LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> Outback XT Limited, Automatic >> Repair and Diagnosis >> Transmission >> Clutch System >> Operating Cylinder >> Installation >> 5MT Model
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

5MT Model

  1. Install in the reverse order of removal.
    NOTE: Before installing the operating cylinder, apply grease (KOPR-KOTE: Part No. 003603001) to the contact point of the release lever and operating cylinder.

    Tightening torque: 

    T1: 18 N.m (1.8 kgf-m, 13.0 ft-lb) 

    T2: 37 N.m (3.8 kgf-m, 27.5 ft-lb) 

    NOTE: The illustration below is for a Non-turbo model. However, perform the same procedures for the Turbo model.
    Fig 1: Installing Operating Cylinder
    G05020129Courtesy of SUBARU OF AMERICA, INC.
  2. After bleeding air from the operating cylinder, ensure that the clutch operates properly.

    <Ref. to CLUTCH FLUID AIR BLEEDING . >

scientia non olet · About LEMON Manuals