6MT Model

Install in the reverse order of removal.
NOTE: Before installing the operating cylinder, apply grease (KOPR-KOTE: Part No. 003603001) to the contact point of the release lever and operating cylinder.

Tightening torque:

T1: 18 N.m (1.8 kgf-m, 13.0 ft-lb)

T2: 41 N.m (4.2 kgf-m, 30.2 ft-lb)

Fig 1: Installing Operating Cylinder (6MT Model)
Courtesy of SUBARU OF AMERICA, INC.
NOTE:
- Be sure to install the clutch hose with the mark side facing upward.
- Be careful not to twist the clutch hose during installation.
  
  Fig 2: Identifying Clutch Hose, Operating Cylinder And Mark
  Courtesy of SUBARU OF AMERICA, INC.
After bleeding air from the operating cylinder, ensure that the clutch operates properly.
<Ref. to CLUTCH FLUID AIR BLEEDING . >