October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
6MT Model
- Set the vehicle on a lift.
- Disconnect the ground cable from the battery.
- Remove the gear shift knob.
- Remove the console box front. <Ref. to
REMOVAL
, Console Box .>
- Remove the front cover assembly.
- Remove the clamp.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the bushing and insulator assembly.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the harness clamp from the plate assembly.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the plate assembly from the vehicle body.
Courtesy of SUBARU OF AMERICA, INC.
- Lift the vehicle.
- Remove the under cover.
- Remove the rear exhaust pipe and muffler. <Ref. to
REMOVAL
, Rear Exhaust Pipe .> <Ref. to
REMOVAL
, Muffler .>
- Remove the heat shield cover.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the crossmember. <Ref. to
REMOVAL
, Transmission Mounting System .>
- Remove the snap pin and washer, and remove the reverse check cable from the reverse check lever.
Courtesy of SUBARU OF AMERICA, INC.
- Move the transmission to the right side, and remove the joint COM PL, stay bolts and reverse check cable.
NOTE:
If the transmission is not moved aside, the joint COM PL and stay bolts may contact the body and cause damage.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the cushion rubber from the vehicle body.
Courtesy of SUBARU OF AMERICA, INC.
- Lower the vehicle.
- Remove the gear shift lever.