LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> Outback i, Automatic >> Repair and Diagnosis >> Transmission >> Clutch System >> Operating Cylinder >> Disassembly
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Operating Cylinder: Disassembly

  1. Remove the boots and push rod assembly.
    NOTE: The illustration below is for a Non-turbo model.
    Fig 1: Identifying Push Rod Assembly Boot
    G05336426Courtesy of SUBARU OF AMERICA, INC.
  2. Apply compressed air through clutch hose attaching port.
    NOTE: Face the piston port down and place a piece of wood underneath to prevent the piston from popping out.
    Fig 2: Identifying Piston Port
    G05336427Courtesy of SUBARU OF AMERICA, INC.
  3. Separate the piston and piston spring.
    NOTE: The illustration below is for a Non-turbo model.
    Fig 3: Identifying Piston And Piston Spring
    G05336428Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals