Enable Condition: Notes
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| Battery voltage | > 10.9 V |
| Barometric pressure | > 75.1 kPa (563 mmHg, 22.2 inHg) |
| Engine coolant temperature | ≥ 70°C(158°F) |
| Catalyst warm-up counter (Map 2) (U5 model) | ≥ 9000 |
| Estimated catalyst temperature (except for U5 model) | ≥ 650°C(1202°F) |
| Misfire detection every 200 rotations | < 5 times |
| Learning value of evaporation gas density | ≤ 0.20 |
| Sub feedback | In operation |
| Evaporative system diagnosis | Not in operation |
| Time of difference (< 0.10) between actual and target lambda | 1000 milliseconds or more |
| Vehicle speed | > 70 km/h (43.5 MPH) |
| Amount of intake air | 10 - 40 g (0.35 - 1.41 oz)/s |
| Engine load change every 0.5 engine revs. | < 0.02 g/rev |
| Rear oxygen output change from 660 mV or less to 660 mV or more | Experienced after fuel cut |
| After engine starting | ≥ 205 seconds |
| Purge execution calculated time | 5 seconds or more |