Select Cable: Installation

Install the select cable to plate assembly.
Tightening torque:

18 N.m (1.8 kgf-m, 13.3 ft-lb)
Install the select cable to the range select lever.
Install the plate assembly to the transmission.
Tightening torque:

T: 25 N.m (2.5 kgf-m, 18.4 ft-lb)

Fig 1: Identifying Select Cable And Plate Assembly
Install the washer and snap pin to range select lever.

Fig 2: Identifying Select Lever, Snap Pin, Select Cable And Clamp
Move the select lever to the "N" range, then adjust the select cable position. < Ref. to ADJUSTMENT , Select Cable.>
Install the front and center exhaust pipe.
- Non-turbo model
  < Ref. to INSTALLATION , Front Exhaust Pipe . >
- Turbo model
  < Ref. to INSTALLATION . > < Ref. to INSTALLATION . >