LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Forester XT, Standard >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> A/T & M/T Control Systems >> Select Lever >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Select Lever: Removal

  1. Set the vehicle on a lift.
  2. Disconnect the ground cable from the battery.
  3. Set the select lever to "N" range.
  4. Lift up the vehicle.
  5. Remove the rear exhaust pipe and muffler.
    • Non-turbo model

      < Ref. to REMOVAL , Rear Exhaust Pipe . > < Ref. to REMOVAL , REMOVAL, Muffler . >

    • Turbo model

      < Ref. to REMOVAL , Rear Exhaust Pipe . > < Ref. to REMOVAL , Muffler . >

  6. Disconnect the cable from range select lever and then remove the cable bracket.
    Fig 1: Identifying Adjusting Nut And Cable Bracket
    G05657425
  7. Lower the vehicle.
  8. Remove the console box. < Ref. to REMOVAL , Console Box . >
  9. Disconnect the connectors, and then remove the four bolts to take out the select lever assembly from vehicle body.
    Fig 2: Locating Select Lever Assembly Bolts
    G05002287
scientia non olet · About LEMON Manuals