Service Data
WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE DATA
| Drive pinion bearing preload (For new bearing) | Measure with spring measurement (Measured from the companion flange bolt) | N (kgf, lbf) | 17.7 - 38.8 (1.8 - 4.0, 4.0 - 8.7) |
| Measure with torque wrench | N.m(kgf-m, ft-lb) | 0.67 - 1.47 (0.07 - 0.15, 0.49 - 1.08) | |
| Side gear backlash | mm (in) | 0.10 - 0.20 (0.004 - 0.008) | |
| Side bearing standard width | mm (in) | 20.00 (0.7874) | |
| Hypoid driven gear to drive pinion backlash | mm (in) | 0.10 - 0.20 (0.004 - 0.008) | |
| Hypoid driven gear runout on its back surface | mm (in) | 0.05 (0.002) | |