Air Cleaner Element: Replacement

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from mass air flow sensor.
- Non-turbo model
  
  Fig 2: Locating Mass Air Flow Sensor Connector (Non-Turbo Model)
  Courtesy of SUBARU OF AMERICA, INC.
- Turbo model
  
  Fig 3: Locating Mass Air Flow Sensor Connector (Turbo Model)
  Courtesy of SUBARU OF AMERICA, INC.
Loosen the camps (A) which connect the air cleaner case to intake duct.
Remove the clips (B) on air cleaner case.
- Non-turbo model
  
  Fig 4: Identifying Air Cleaner Case Camps And Clips (Non-Turbo Model)
  Courtesy of SUBARU OF AMERICA, INC.
- Turbo model
  
  Fig 5: Identifying Air Cleaner Case Camps And Clips (Turbo Model)
  Courtesy of SUBARU OF AMERICA, INC.
Remove the air cleaner element.

Fig 6: Removing Air Cleaner Element
Courtesy of SUBARU OF AMERICA, INC.
Install in the reverse order of removal.
CAUTION: When replacing the air cleaner element, use SUBARU Genuine air cleaner element according to the engine type. Using other air cleaner element may affect engine performance.
NOTE:
- Fasten with a clip after inserting the lower tab of case.
  
  Fig 7: Installing Air Cleaner Element
  Courtesy of SUBARU OF AMERICA, INC.
- Refer to "COMPONENT" for tightening torque. 2.5 L non-turbo model
  < Ref. to COMPONENT , General Description. >
  
  2.5 L turbo model
  
  < Ref. to COMPONENT , General Description. >
  
  3.0 L model
  
  < Ref. to COMPONENT , General Description . >