LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission (Diagnostics) (5AT) >> Learning Control >> Procedure >> Driving Learning
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driving Learning

  1. Start the engine.
  2. Connect the Subaru Select Monitor to the vehicle.
  3. Drive the vehicle for 5 - 10 km (3 - 6 miles) to warm up ATF temperature to be 60°C (140°F) or more.
  4. While checking that the throttle opening angle on Subaru Select Monitor is within the specified range, shift the gear from 1st → 2nd, 2nd → 3rd, 3rd → 4th, and 4th →5th, while driving the vehicle at "D" range. <Ref. to READ CURRENT DATA , OPERATION, Subaru Select Monitor.>

    Acceleration opening angle: 

    30% or more 

  5. Repeat the step  4) until the reducing effect of the shifting shock is felt.
  6. If reducing of shifting shock is not felt after performing the cycle described in step  4), recheck that the learning conditions (throttle opening angle, ATF temperature, etc.) are as specified, or recheck that other parts are normal.
scientia non olet · About LEMON Manuals