LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H6DO) >> Subaru Select Monitor >> Operation >> Read Current Data For Engine (OBD Mode)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Read Current Data For Engine (OBD Mode)

  1. On the « Main Menu » display screen, select the {Each System Check}.
  2. On the « System Selection Menu » display screen, select the {Engine Control System}.
  3. Click the [OK] button after the information of engine type has been displayed.
  4. On the « Engine Diagnosis » display screen, select the {OBD System}.
  5. On the « OBD Menu » display screen, select the {Current Data Display & Save}.
  6. On the « Current Data Display & Save » display screen, select the {All Data Display}.
  7. Using the scroll key, scroll the display screen up or down until the desired data is shown.
    • A list of the support data is shown in the following table.
    CURRENT DATA FOR ENGINE (OBD MODE)

    Description Display Referential value (at idling) Unit of measure
    Number of diagnosis code Number of Diag. Codes: 0 -
    Condition of malfunction indicator light Ml (MIL) OFF -
    Monitoring test of misfire Misfire monitoring (Supp) YES -
    Monitoring test of misfire Misfire monitoring (Rdy) YES -
    Monitoring test of fuel system Fuel System Monitoring (Supp) YES -
    Monitoring test of fuel system Fuel System Monitoring (Rdy) YES -
    Monitoring test of comprehensive component Component monitoring (Supp) YES -
    Monitoring test of comprehensive component Component monitoring (Rdy) YES -
    Test of catalyst Catalyst Diagnosis (Supp) YES -
    Test of catalyst Catalyst Diagnosis (Rdy) NO -
    Test of heating-type catalyst Heated catalyst (Supp) NO -
    Test of heating-type catalyst Heated catalyst (Rdy) N/A -
    Test of evaporative emission purge control system Evaporative purge system (Supp) YES -
    Test of evaporative emission purge control system Evaporative purge system (Rdy) NO -
    Secondary air system test Secondary air system (Supp) NO -
    Secondary air system test Secondary air system (Rdy) N/A -
    Test of air conditioning system refrigerant A/C system refrigerant (Supp) NO -
    Test of air conditioning system refrigerant A/C system refrigerant (Rdy) N/A -
    Test of oxygen sensor Oxygen sensor (Supp) YES -
    Test of oxygen sensor Oxygen sensor (Rdy) NO -
    Test of oxygen sensor heater Oxygen Heater Diagnosis (Supp) YES -
    Test of oxygen sensor heater Oxygen Heater Diagnosis (Rdy) NO -
    Test of EGR system EGR system (Supp) YES -
    Test of EGR system EGR system (Rdy) NO -
    Air fuel ratio control system for bank 1 Fuel system for Bank 1 Normal CLOSE -
    Air fuel ratio control system for bank 2 Fuel system for Bank 2 Normal CLOSE -
    Engine load data Load 21.0 %
    Engine coolant temperature signal Coolant Temp. 91 °C
    Short term fuel trim by front oxygen (A/F) sensor (Bank 1) A/F Compensation #1 17.2 %
    Long term fuel trim by front oxygen (A/F) sensor (Bank 1) A/F Learning #1 5.5 %
    Short term fuel trim by front oxygen (A/F) sensor (Bank 2) A/F Compensation #2 17.2 %
    Long term fuel trim by front oxygen (A/F) sensor (Bank 2) A/F Learning #2 5.5 %
    Intake manifold absolute pressure signal Mani. Absolute Pressure 233 mmHg
    Engine speed signal Engine speed 700 RPM
    Vehicle speed signal Vehicle speed 0 km/h
    #1 Cylinder ignition timing Ignition Timing #1 16.5 °
    Intake air temperature signal Intake Air Temp. 54 °C
    Amount of intake air Mass Air Flow 2.8 g/s
    Throttle position signal Throttle Opening Angle 13 %
    Oxygen sensor (Bank 1 Sensor 2) Oxygen sensor#12 0.1 - 0.7 V
    A/F correction (Bank 1 Sensor 2) Short term fuel trim #12 0.0 %
    Oxygen sensor (Bank 2 Sensor 2) Oxygen sensor #22 0.1 - 0.7 V
    A/F correction (Bank 2 Sensor 2) Short term fuel trim #22 0.0 %
    On-board diagnostic system OBD system OBD/OBD2 -
    Front oxygen (A/F) sensor (bank 1 sensor 1) Oxygen sensor #11 Support -
    Oxygen sensor (Bank 1 Sensor 2) Oxygen sensor #12 Support -
    Front oxygen (A/F) sensor (bank 2 sensor 1) Oxygen sensor #21 Support -
    Oxygen sensor (Bank 2 Sensor 2) Oxygen sensor #22 Support -
    Elapsed time after engine start Elapsed time after starting the engine - sec
    Driving distance after the malfunction indicator light illuminates Elapsed time after MIL illuminating - km
    A/F lambda signal (Bank 1 Sensor 1) A/F sensor #11 1.001 -
    A/F sensor output signal (Bank 1 Sensor 1) A/F sensor #11 2.805 V
    A/F lambda signal (Bank 2 Sensor 1) A/F sensor #21 1.001 -
    A/F sensor output signal (Bank 2 Sensor 1) A/F sensor #21 2.805 V
    Target EGR Target EGR 0 %
    EGR deviation EGR Error 0.0 %
    Evaporative purge Evaporative purge 0 %
    Fuel level signal Fuel level - %
    Number of warm ups after DTC clear Number of warm ups after DTC clear - -
    Travel distance after DTC clear Travel distance after DTC clear - km
    Fuel tank pressure signal Tank pressure 8.8 mmHg
    Barometric pressure signal Atmospheric pressure Atmospheric pressure mmHg
    A/F lambda signal (Bank 1 Sensor 1) A/F sensor #11 0.999 -
    A/F sensor current (Bank 1 Sensor 1) A/F sensor #11 0.02 mA
    A/F lambda signal (Bank 2 Sensor 1) A/F sensor #21 0.999 -
    A/F sensor current (Bank 2 Sensor 1) A/F sensor #21 0.02 mA
    Catalyst temperature #1 Catalyst Temperature #11 - °C
    Catalyst temperature #2 Catalyst Temperature #21 - °C
    Monitoring test of misfire Misfire monitoring (Enable) YES -
    Monitoring test of misfire Misfire monitoring (Comp) NO -
    Monitoring test of fuel system Fuel system monitoring (Enable) YES -
    Monitoring test of fuel system Fuel system monitoring (Comp) NO -
    Monitoring test of comprehensive component Component monitoring (Enable) YES -
    Monitoring test of comprehensive component Component monitoring (Comp) NO -
    Test of catalyst Catalyst Diagnosis (Enable) YES -
    Test of catalyst Catalyst Diagnosis (Enable) NO -
    Test of heating-type catalyst Heated catalyst (Enable) N/A -
    Test of heating-type catalyst Heated catalyst (Comp) N/A -
    Test of evaporative emission purge control system Evaporative purge system (Enable) NO -
    Test of evaporative emission purge control system Evaporative purge system (Comp) NO -
    Secondary air system test Secondary air system (Enable) N/A -
    Secondary air system test Secondary air system (Comp) N/A -
    Test of air conditioning system refrigerant A/C system refrigerant (Enable) N/A -
    Test of air conditioning system refrigerant A/C system refrigerant (Comp) N/A -
    Test of oxygen sensor Oxygen senor (Enable) YES -
    Test of oxygen sensor Oxygen senor (Comp) NO -
    Test of oxygen sensor heater Oxygen sensor heater (Enable) YES -
    Test of oxygen sensor heater Oxygen sensor heater (Comp) NO -
    Test of EGR system EGR system (Enable) YES -
    Test of EGR system EGR system (Comp) NO -
    ECM power voltage ECM power voltage 13.789 V
    Absolute load Absolute load 22 %
    A/F target lambda A/F target lambda value 0.976 -
    Relative throttle opening angle Relative throttle opening angle 2 %
    Ambient temperature Ambient temperature Ambient air temperature °C
    Absolute throttle opening angle 2 Absolute throttle opening angle 2 32 %
    Absolute accelerator opening angle 1 Absolute accelerator opening angle 1 13 %
    Absolute accelerator opening angle 2 Absolute accelerator opening angle 2 13 %
    Target throttle opening angle Target throttle opening angle 0 %
    Engine operating time while malfunction indicator light lit Engine operation time during MIL on - min
    Elapsed time after DTC clear Elapsed time after DTC clear - min
    Fuel used Used fuel GAS -
    Relative accelerator opening angle Relative throttle opening angle 0 %
    NOTE: For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
scientia non olet · About LEMON Manuals