EGR Valve Control
CAUTION:
After executing the operation check mode, execute the Clear Memory Mode <Ref. to
OPERATION , Clear Memory Mode.>.
- On the « System operation check mode » display, select the {EGR Valve Control}.
- On the « Start the Engine » display screen, start the engine and click the [OK] button.
- In the « EGR Valve Control » screen, click the [↑] button or the [↓] button to change the setting values, then click the [OK] button.
Setting is possible in 1 STEP increments. However, the number of STEPs that can actually be controlled will vary depending on the vehicle.
- Click the [Cancel] button to end the EGR valve control. The screen will return to the « System Operation Check Mode » screen.NOTE: For detailed operation procedure, refer to the "PC application for Subaru Select Monitor".