LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H6DO) >> System Operation Check Mode >> Operation >> Idle Speed Control
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Idle Speed Control

CAUTION: After executing the operation check mode, execute the Clear Memory Mode <Ref. to OPERATION , Clear Memory Mode.>.
  1. On the « System operation check mode » display screen, select the {Idle Speed Control}.
  2. On the « Start the Engine » display screen, start the engine and click the [OK] button.
  3. In the « Idle Engine Speed Control » screen, click the [↑] button or the [↓] button to change the setting values, then click the [OK] button.

    Setting is possible in a range between 500 RPM - 2000 RPM, in increments of 50 RPM. However, the engine speed that can actually be controlled will vary depending on the vehicle or auxiliary load condition.

  4. Click the [Cancel] button to end the idle speed control. The screen will return to the « System Operation Check Mode » screen.
    NOTE: For detailed operation procedure, refer to the "PC application for Subaru Select Monitor".
scientia non olet · About LEMON Manuals