Injector Control (Injection Stop Mode)
CAUTION:
After executing the operation check mode, execute the Clear Memory Mode <Ref. to
OPERATION , Clear Memory Mode.>.
- On the « System operation check mode » display, select the {Injector Control}.
- On the « Injector Control » display screen, select the {Injection Stop Mode}.
- Select the desired injector number on the « Injection Stop Mode » screen, and click the [OK] button.
- On the « Start the Engine » display screen, start the engine and click the [OK] button.
- Click the [Cancel] button to return the « Injection Stop Mode » display screen.
- On the « Injection Stop Mode » display screen, click the [Return] button to end the « Injection Stop Mode ». The screen will return to the « Injector Control » screen.NOTE: For detailed operation procedure, refer to the "PC application for Subaru Select Monitor".