LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Pipe Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pipe Assembly: Installation

  1. Install in the reverse order of removal.

    Tightening torque: 

    <Ref. to POWER ASSISTED SYSTEM , COMPONENT, General Description.>

  2. Fill with the specified fluid.
    CAUTION: Never start the engine before feeding the fluid otherwise the vane pump might be seized.
  3. Finally, check the clearance between pipes or hoses as shown in the figure indicated in "General Diagnostic Table". <Ref. to INSPECTION OF CLEARANCE , INSPECTION, General Diagnostic Table.>
scientia non olet · About LEMON Manuals