LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2009 >> Tribeca Limited >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection System (H6DO) >> Camshaft Position Sensor >> Removal >> Intake Side
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Intake Side

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
  3. Remove the generator harness from the fuel protector LH.
  4. Remove the fuel protector LH.
    Fig 1: Locating Fuel Pipe Protector Bolts
    G05018408Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from intake camshaft position sensor LH.
    Fig 2: Identifying Intake Camshaft Position Sensor LH
    G05667582Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the intake camshaft position sensor LH.
    Fig 3: Identifying Intake Camshaft Position Sensor LH
    G05667583Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the intake camshaft position sensor RH in the same procedure as LH.
scientia non olet · About LEMON Manuals