September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Steering Wheel: Inspection
Measure the paddle switch resistance.
Courtesy of SUBARU OF AMERICA, INC. DIAGNOSTIC PROCEDURE
| Step |
Check |
Yes |
No |
1 SHIFT-UP SWITCH CONTINUITY CHECK.
- Operate the + side of paddle shift assembly and hold it.
- Measure the resistance between the paddle shift assembly connector terminals.
Terminals
No. 2 - No. 4:
|
Is the resistance less than 10 Ω? |
Go to step 2
. |
Replace the paddle shift assembly. |
2 SHIFT-DOWN SWITCH CONTINUITY CHECK.
- Operate the - side of paddle shift assembly and hold it.
- Measure the resistance between the paddle shift assembly connector terminals.
Terminals
No. 2 - No. 3:
|
Is the resistance less than 10 Ω? |
Go to step 3
. |
Replace the paddle shift assembly. |
3 CHECK SHIFT SWITCH INSULATION.
- Do not operate the paddle shift assembly.
- Measure the resistance between the paddle shift assembly connector terminals.
Terminals
No. 2 - No. 4:
No. 2 - No. 3:
|
Is the resistance 1 MΩ or more? |
Paddle shift assembly is normal. |
Replace the paddle shift assembly. |