Intermediate Case: Assembly

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install the reverse brake. Refer to , ASSEMBLY , Reverse Brake Assembly.
install all plugs to intermediate case.
Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)

NOTE: Use new O-rings.

Fig 1: Identifying CVTF Filler Plug On Intermediate Case (View 2 Of 2)
Courtesy of SUBARU OF AMERICA, INC.
Install the CVTF filler plug.
NOTE: Replace the gasket of CVTF filler plug with a new part after installing the transmission assembly to vehicle and adjusting CVTF fluid.