LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2011 >> Forester X, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Transmission Control Module (TCM) >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Transmission Control Module (TCM): Installation

  1. Install the TCM to the bracket.
    CAUTION: To avoid the damage to bracket and TCM, do not remove after installing TCM to bracket. If installed by mistake, the part must be replaced with a new part.
  2. Install the TCM.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

    Fig 1: Transmission Control Module And Brake Pedal
    G07665554Courtesy of SUBARU OF AMERICA, INC.
  3. Connect the connector to TCM.
  4. Install in the reverse order of removal.
  5. Perform the diagnosis again. < Ref. to PROCEDURE , Learning Control. >