User Customizing
User CustomizingOPERATION
1. On {{Main Menu}} display, select {Each System Check}.
2. On {{System Selection Menu}} display, select {Integ. unit mode}.
3. On {{Integ. unit mode failure diag.}} display, select {Integ. Unit customizing}.
4. Change the setting with UP/DOWN key and set with the [OK] key.
List of User Customizing item
5. After setting, make sure that the setting changed in the {Current Data Display & Save} is same as vehicle equipment.
CAUTION:
- The above settings must match the actual vehicle equipment.
- Do not change settings except for setting above while setting the functions.
- Be sure not to change Factory initial setting except when installing a new body integrated unit.
NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".