LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2011 >> Outback Limited >> Repair and Diagnosis >> Engine Performance >> System >> Engine Diagnostics (H4SO) >> Drive Cycle >> Procedure >> Preparation For Drive Cycle
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Preparation For Drive Cycle

  1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 l  (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
  2. After performing the diagnostics and Clear Memory Mode, check that no DTC remains. Refer to , CLEAR MEMORY MODE .
  3. Check the delivery (test) mode fuse is removed.
NOTE:
  • Perform the drive cycle after warming up the engine except when the engine coolant temperature at engine start is specified.
  • Perform the drive cycle twice if the DTC in the list is marked with *. After completing the first drive cycle, stop the engine and perform second diagnosis in same condition.
scientia non olet · About LEMON Manuals