LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2011 >> Outback Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Security And Locks) >> Keyless Entry Control Module >> Removal >> Outback Model
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Outback Model

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the rear quarter trim LH. Refer to REAR QUARTER TRIM .
  3. Remove the keyless entry control module.
    1. Disconnect the connector.
    2. Remove the bolt and remove the keyless entry control module.
      Fig 1: Removing Keyless Entry Control Module (Outback Model)
      G06653940Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals