Oil Pressure Switch: Installation

Apply liquid gasket to the oil pressure switch threads.
Liquid gasket:

THREE BOND 1324 (Part No. 004403042) or equivalent

Fig 1: Identifying Oil Pressure Switch Threads
Courtesy of SUBARU OF AMERICA, INC.
Install the oil pressure switch to cylinder block.
Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)

Fig 2: Locating Oil Pressure Switch With Cylinder Block
Courtesy of SUBARU OF AMERICA, INC.
Connect the terminal to the oil pressure switch.

Fig 3: Locating Terminal On Oil Pressure Switch
Courtesy of SUBARU OF AMERICA, INC.
Install the generator. Refer to GENERATOR .
Connect the ground cable to battery.

Fig 4: Connecting Ground Cable To Battery
Courtesy of SUBARU OF AMERICA, INC.