Front Hub Unit Bearing: Assembly
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Install the hub unit bearing to the ST securely.
PREPARATION TOOL:
ST: HUB STAND (927080000)
- Using a press, press the new hub bolts (b) until their seating surfaces contact the hub unit bearing (a).
NOTE: Use the 12 mm (0.47 in) dia. holes in the HUB STAND to prevent bolts from tilting.