LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2011 >> Tribeca Limited >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Pipe Assembly >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Pipe Assembly: Installation

  1. Install in the reverse order of removal.

    Tightening torque: Refer to  POWER ASSISTED SYSTEM  , COMPONENT, General Description. 

  2. Fill with the specified fluid.
    CAUTION: Never start the engine before filling with fluid; otherwise the vane pump may become seized.
  3. Finally, check the clearance between pipes or hoses as shown in the figure indicated in "General Diagnostic Table". Refer to INSPECTION OF CLEARANCE , INSPECTION, General Diagnostic Table.
scientia non olet · About LEMON Manuals