LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Forester X, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Security And Locks >> Security System >> Inspection >> Check Security System Condition Memory
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Security System Condition Memory

  1. Pull out the key from the ignition switch, or turn the ignition to OFF.
  2. Close all the doors and the rear gate.
  3. Open the front hood.
  4. Press the LOCK button of the keyless transmitter.
    NOTE: Wait until the security indicator light blinks twice within 0.5 second at 2 seconds intervals.
    If the 30 seconds monitoring lag has been set, wait 30 seconds.
  5. Disconnect the ground cable from the battery.
  6. Connect the ground cable to the battery.
  7. Check that the security indicator light blinks twice within 0.5 second at 2 seconds intervals. When it does not blink, replace the body integrated unit.
scientia non olet · About LEMON Manuals