SUBARU Select Monitor (Normal Mode)

On << Main Menu >> display, select {Each System Check}.
On << System Selection Menu >> display, select {Engine Control System}.
Click the [OK] button after the information of engine type has been displayed.
On << Engine Diagnosis >> display, select {Diagnostic Code(s) Display}.
On << Diagnostic Code(s) Display >> display, select {Temporary Diagnostic Code(s)} or {Memorized Diagnostic Code(s)}.
NOTE:
- For detailed operation procedures, refer to application help for Subaru Select Monitor.
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". < refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >