SUBARU Select Monitor (OBD Mode)

On the << Main Menu >> display screen, select the {Each System Check}.
On the << System Selection Menu >> display screen, select the {Engine Control System}.
Click the [OK] button after the information of engine type has been displayed.
On the << Engine Diagnosis >> display screen, select the {OBD System}.
On the << OBD Menu >> display screen, select the {Diagnostic Code (s) Display}.
Make sure DTC is shown on the screen.
NOTE:
- For detailed operation procedure, refer to the PC application help for Subaru Select Monitor.
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >