Intake Manifold: Disassembly

WARNING: This page is about a different variant/trim than selected.

Remove the engine harness from intake manifold. Refer to , ENGINE HARNESS , COMPONENT, General Description.
Remove the fuel injector pipe and hose.

Fig 1: Locating Fuel Injector Pipe And Hose Clamp Bolts (LH Side)
Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Locating Fuel Injector Pipe And Hose Clamp Bolts (RH Side)
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel pipe assembly.

Fig 3: Locating Fuel Pipe Assembly Nuts (1 Of 2)
Courtesy of SUBARU OF AMERICA, INC.

Fig 4: Locating Fuel Pipe Assembly Nuts (2 Of 2)
Courtesy of SUBARU OF AMERICA, INC.
Remove the EGR valve. Refer to , REMOVAL , EGR Valve.
Remove the manifold absolute pressure sensor. Refer to , REMOVAL , Manifold Absolute Pressure Sensor.
Remove the purge control solenoid valve. Refer to PURGE CONTROL SOLENOID VALVE .