Front ABS Wheel Speed Sensor: Installation

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

Tightening torque: 7.5 N.m (0.76 kgf-m, 5.53 ft-lb)

CAUTION: Be careful not to damage the sensor.

NOTE:

Check the identification (mark) on the harness to make sure there is no warpage. (W1 (White))
Check if the harness is not pulled and does not come in contact with the suspension or body during steering wheel effort.