LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Vehicle Dynamics Control (VDC)) >> VDC Sequence Control >> Specification >> Conditions For Completion Of VDC Sequence Control
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Conditions For Completion Of VDC Sequence Control

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

When the following conditions develop, the VDC sequence control stops and VDC operation is returned to the normal control mode.

  1. When the speed of at least one wheel reaches 10 km/h (6 MPH).
  2. When the brake pedal is pressed during sequence control and the stop light switch is set to ON.
  3. After completion of VDC sequence control.
  4. When a malfunction is detected.
scientia non olet · About LEMON Manuals