Stop Light Switch: Installation

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Install the stop light switch onto the bracket with screws and position it with the nut.
Adjust the stop light switch position, and then tighten the nut.

Refer to ADJUSTMENT , Stop Light Switch.

Tightening torque:

8 N.m (0.8 kgf-m, 5.8 ft-lb)

Fig 1: Identifying Stop Light Switch Nut Tightening Torque

Courtesy of SUBARU OF AMERICA, INC.