DTC 2A ODS Calibration Error: DTC Detecting Condition
WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
System calibration (Rezeroing) was not completed normally.
DIAGNOSTIC PROCEDURE CHART
| Step | Check | Yes | No |
|---|---|---|---|
| 1 PERFORM RE-ZEROING. Perform the system calibration using Subaru Select Monitor. Refer to SYSTEM CALIBRATION (REZEROING) , OPERATION, Subaru Select Monitor. |
Is the system calibration completed normally? | Finish the diagnosis. | Follow the system calibration procedures, Refer to SYSTEM CALIBRATION (REZEROING) , OPERATION, Subaru Select Monitor. |