LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Rear Drive Shaft >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Drive Shaft: Installation

  1. Select shims. Refer to , ADJUSTMENT , Transfer Clutch.
  2. Install the drive plate and driven plate.
  3. Insert the rear driveshaft into the center differential assembly.
  4. Combine the extension case, and then install the rear vehicle speed sensor. Refer to , INSTALLATION , Extension Case.
  5. Install the transmission assembly to the vehicle. Refer to , INSTALLATION , Automatic Transmission Assembly.