Inspection steps

WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Clearing diagnostic code
1. Clear the diagnostic code using the SSM4. (Refer to CHECKING/CLEARING DIAGNOSTIC CODES )

DTC check

Use the SSM4 to confirm that diagnostic code B1010 is not being output again. (Refer to CHECKING/CLEARING DIAGNOSTIC CODES )

RESULT DESCRIPTION

Result	Go to
If the diagnostic code is being output again	A
If the diagnostic code is not output	B

B: Go to "How to simulate trouble phenomenon" (Refer to PROCEDURES FOR MALFUNCTION PHENOMENON SIMULATION )

A: Go to next step

Replacement of the main body ECM (network gateway computer) (Refer to REMOVAL )