SUBARU Select Monitor (Normal Mode)

On «Main Menu» display, select {Each System Check}.
On «System Selection Menu» display, select {Engine Control System}.
Click the [OK] button after the information of engine type has been displayed.
On «Engine Diagnosis» display, select {Diagnostic Code(s) Display}.
On «Diagnostic Code(s) Display» display, select {Temporary Diagnostic Code(s)} or {Memorized Diagnostic Code(s)}.
NOTE:
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >