LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Immobilizer System (Diagnostics)) >> Clear Memory Mode >> Operation >> ECM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clear Memory Mode: Operation: ECM

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. On «Main Menu» display, select {Each System Check}.
  2. On «System Selection Menu» display, select {Engine Control System}.
  3. After engine type information is displayed, select [OK].
  4. On «Engine Diagnosis» display, select {Clear Memory}.
  5. When "Done" is displayed on the display, end the Subaru Select Monitor and turn the ignition switch to OFF.
    NOTE:
    • Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.
    • For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
scientia non olet · About LEMON Manuals