Confirmation Of Current Setting
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- On «Main Menu» display, select {Each System Check}.
- On «System Selection Menu» display, select {Integ. unit mode}.
- On «Integ. unit mode failure diag.» display, select {Current Data Display & Save}.
- Using the scroll key, scroll the display screen up or down until the desired data is shown.
- Display the following item and record the settings.
Required items for new registration (Except for system not equipped)
Item Item to confirm Remarks number of regist. 1 2 3 4 Registered ID type Off delay time OFF Long Normal Short Setting for lighting off time Rr Defogger op. mode Normal Continuous Security Alarm Setup ON OFF Impact Sensor Setup ON OFF Option setting Alarm delay setup ON OFF Lockout prevention ON OFF Impact sensor support no support Option setting Buzzer beeping setup ON OFF Emergency light setup ON OFF Buzzer setting support no support Passive Alarm ON OFF Door open warning support no support Dome Light Alarm Setting ON OFF Map Light Setting ON OFF Belt Warning Switch ON OFF Switch the belt warning lighting and the buzzer sound. Map lamp 30 sec off record support no support A/C ECM setting support no support Model with auto A/C wiperdeicer support no support Option setting Sedan/Wagon Setting Sedan Wagon MT/AT Setting AT MT 6MT Setting 6MT Other than 6MT Factory initial setting Factory Market Do not change to factory mode.