Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS - ALL
| Overlap prohibited DTC | None |
| Atmospheric pressure | 75.06 kPa (abs) {0.8 kgf/cm2 , 10.9 psi (abs)} or more |
| Battery Voltage | 10.9V or more |
| Vehicle speed | 2 km/h {1.2 MPH} or less |
| Throttle opening angle | Less than 0.296% |
| Elapsed time after changing the gear position from N ↔D. | 3 seconds or more |
TYPICAL ENABLING CONDITIONS - P050A
| Engine coolant temperature | 80°C {176°F} or less |
| Total air induction | Less than 800 g {28.22 oz} (varies depending on the engine coolant temperature at engine start) |
| Elapsed time after starting the engine | 2 seconds or more |
TYPICAL ENABLING CONDITIONS - P050B
| Engine coolant temperature | 80°C {176°F} or less |
| Total air induction | Less than 800 g {28.22 oz} (varies depending on the engine coolant temperature at engine start) |
| Ignition timing commanded by CSERS | 3°CA or less |