Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS - P0512
| Overlap prohibited DTC | P0500 (Vehicle speed sensor) |
| Battery Voltage | 8V or more |
| Engine State | Rotating |
TYPICAL ENABLING CONDITIONS - P0616
| Overlap prohibited DTC | P0500 (Vehicle Speed Sensor (VSS)): Without push start system None: With push start system |
| Battery Voltage | 8V or more |
| Engine State | Stop →Rotating |
| Vehicle speed | Less than 1km/h {0.6 MPH} |
TYPICAL ENABLING CONDITIONS - P0617 (WITH PUSH START SYSTEM)
| Overlap prohibited DTC | None |
| Battery Voltage | 8V or more |
| Engine State | Rotating |
| ST relay | OFF |
TYPICAL ENABLING CONDITIONS - P0617 (WITHOUT PUSH START SYSTEM)
| Overlap prohibited DTC | None |
| Battery Voltage | 8V or more |
| Engine State | Rotating |
TYPICAL ENABLING CONDITIONS - P081A
| Overlap prohibited DTC | None |
| Battery Voltage | 8V or more |
| Vehicle speed | Less than 4km/h {2.5 MPH} |
| ST Cut Relay | OFF |