Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS - TRANSMISSION M/T
| Overlap prohibited DTC | P0500 (Vehicle Speed Sensor (VSS)) |
| ST relay | OFF |
| Starter | OFF |
| Battery Voltage | 10.9V or more |
| Changing the driving condition from A to B described below: | ON |
| A. All of the following conditions are met: | (a), (b) |
| (a) Vehicle speed | 0 km/h {0 MPH} or less |
| (b) Engine speed | 550 to 880 r/min |
| B. All of the following conditions are met: | (a), (b) |
| (a) Vehicle speed | 64km/h {40 MPH} or more |
| (b) Engine speed | 1600 to 2600 r/min |
TRANSMISSION A/T
| Overlap prohibited DTC | P0616, P0617, P0512 (starter switch circuit with push start system) U0073, U0101, U0402 (CAN System) |
| ST relay | OFF |
| Starter | OFF |
| Battery Voltage | 10.9V or more |
| Range switch of Transmission A/T (TCM) | Normal |
| Engine Speed | 500 RPM or more |