LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2014 >> BRZ Premium >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Stability Control System >> Vehicle Stability Control System >> Function Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Function Inspection

  1. Initial check of brake system indicator light
    1. Turn the ignition switch to ON.
    2. Check that the ABS warning light, the brake warning light, the TRC OFF indicator light, the Vehicle stability control OFF indicator light, the Vehicle stability control SPORT indicator light and the slip indicator light illuminate and that they go off in approx. 3 seconds.
      NOTE: When any one of the lights does not illuminate, check the combination meter Assembly.
  2. Brake actuator operation check
    1. Preparation for inspection
      1. Connect SSM3 to DLC3 with IG turned OFF, and start the engine.
      2. Turn SSM3 ON, and select [ABS/VDC System]→[Work Support]→[Function Check Sequence].
scientia non olet · About LEMON Manuals